如何为噪声敏感型应用选择一款线性稳压器.pdfVIP

Texas Instruments Incorporated Power Management 如何为噪声敏感型应用选择一款线性稳压器 How to pick a linear regulator for 作者： ，德州仪器 营销工程师 Sureena Gupta (TI) noise-sensitive applications By Sureena Gupta Marketing Engineer 噪声敏感型应用要求一种内部噪声低且能够抑制电源噪 线性稳压器的 可被划分为三个频率范围区域。第 The PSRR of a linear regulator can be divided into three Noise-sensitive applications require a power supply that PSRR generates low internal noise and rejects noise from the frequency-range regions. The first region extends from DC 声的电源。这些应用包括测试与测量应用、医疗设备、 一个区域从 到转降频率。该区域内的纹波抑制度基 DC power source. These applications include test and to the roll-off frequency. The ripple rejection in this region 通信设备、基站等等。低噪声电源用于驱动信号链，包 本由开环路增益和带隙基准主导。第二个区域从转降频 measurement applications, medical equipment, communi- is mostly dominated by open-loop gain and the bandgap reference. The second region extends from the roll-off fre- 括数据转换器、放大器、时钟、抖动消除器、 、模 率延伸到单位增益频率。该区域内的 常常高于第 cation equipment, base stations, and many others. A low- PLL PSRR noise power supply is used to power a signal chain that quency to the unity-gain frequency. The PSRR in this 拟前端以及众多其它器件。对于保持信号精确度和完整 一个区域，并且主要由稳压器的开环路增益主导。第三 includes data converters, amplifiers, clocks, jitter cleaners, region is usually higher than in the first region and is 性而言，低噪声电源解决方案是一种基本要求。本文为 个区域的频率范围高于单位增益频率。输出电容器以及 PLLs, analog front ends and many other devices. A low- mainly dominated by t