冷弯薄壁C形钢梁弯曲变形分析.pdfVIP

第 40 卷 第 2 期 建 　筑 　结 　构 2010 年 2 月 冷弯薄壁 C 形钢梁弯曲变形分析 1 2 2 苗二萍 , 　刘小峰 , 　彭奕亮 ( 1 西安建筑科技大学土木工程学院 ,西安 710055 ; 2 河南省电力勘测设计院 ,郑州 450007) [摘要] 　对 13 根 Q235 冷弯薄壁型钢卷边槽形截面简支梁试件的试验进行了变形性能分析 ,结果表明:北美规范按 ( 最大弯矩控制截面计算有效截面刚度进行变形分析偏保守 ;我国冷弯薄壁型钢技术规范按毛截面计算 相当于等 ) 截面 、等刚度梁分析 偏于不安全 。因此通过对该试验的数据进行参数分析 ,提出了一个变形计算公式中较合理的 折减系数 。 [ 关键词] 　冷弯薄壁 ; 卷边槽形钢梁 ; 有效截面 Research on reduction factor in the deformation formula of coldformed steel beams 1 2 2 Miao Erping , Liu Xiaofeng , Peng Yiliang ( 1 School of Civil Engineering , Xi ’an University of Architecture and Technology , Xi ’an 710055 , China ; 2 Henan Electric Power Survey and Design Institute ,Zhengzhou 450007 , China) Abstract :The deformation behavior of a total of thirteen Q235 coldformed lipped channel simple beams under bending has been studied . The results indicate that the deformation analysis under effective crosssection rigidity calculated by controlling the greatest moment was conservative according to the North American Specification , and the deformation calculated by gross section (equivalent to analysis equal a crosssection and stiffness beam) was unsafety according to the Chinese Specification . Based on the parameter analysis , a more reasonable reduction factor is presented in the deformation formula . Keywords :coldformed thinwall ; lipped channel steel beam ; effective crosssection 0 　 前言