ITER上窗口屏蔽中子学分析研究_郑善良.pdfVIP

25 4 Vol. 25 N o. 4 2005 12 Chinese Journal of N uclear Science and Engineering Dec. 2005 ITER 郑善良, 刘松林, 林 辉, 曾 勤, 吴宜灿 ( , 230031) : CAD/ MCNP MCAM IT ER , / MCNP/ 4CIAEA FENDL 1.0 IT ER , , , : IT ER; ; ; :TL641 2 : A : 025 -091 (2005) 04-0361-06 Neutronics analysis of theupperport for ITER ZHENG Shan-liang, LIU Song-lin, LIN Hui, ZEN G Qin, WU Y-i can ( Institute of Plasma Physics, Chinese Academ y of Sciences, H efei of Anhui Prov. 230031, China) Abstract:T o confirm the sufficiency of shielding capability, the upper port geometry in the ITER 3-D basic model has been efficiently and reliably modified according to the up- dated draw ings of the new design by using the home-developed CAD/ M CNP interface code, i. e. M CAM . On the basis of the modified IT ER 3-D model w ith new upper port geometry in comparison w ith those w ith the original upper port geometry, the distribu- tions of fast neutron flux, dose rates after shutdow n around the upper ports and nuclear heat in the PF- 1 and PF-2 have been calculated by the M CNP/ 4C and the relevant data library FENDL 1. 0. An increase of several folds in the fast neutron flux, the nuclear heat and the shutdow n dose rate for the new upper port design has been observed in the calculated results for the new design. T he new design needs to be improved. Keywords:IT ER; neutronics; shielding; upper port : 2005-07- 11; : 2005-0 - 25 : IT ER ( : IT A- 73-01- CN, 2003) : , ( 1979) ) , , , 361 19 5 , 1 ( IAEA ) , ) ) ) / ( Inter- , ITER national Thermonuclear Experimental Reac- M CNP , tor