粗轧机的快速电动压下装置的设计.docVIP

摘 要 轧钢生产是将钢锭或钢坯轧制成钢材的生产环节。用轧制方法生产钢材，具有生产90%的钢都经过轧制成材的。轧钢生 压下装置的作用是调整轧辊水平位置（调整辊缝），以保证轧件按给定的压下量轧 当轧辊间没有轧件时，由于上轧辊及其轴承座的重力作用，在轴承座于压下螺丝之 BD1开坯机可逆式二辊轧机是德国SMS公司制造的生产轨粱钢材的新机器，它能更Abstract Rolled steel production is rolling into a steel ingot or billet steel production.With production of rolled steel, with high productivity, multispecies, the continuity of the production process, and is easy to realize the advantages of mechanization and automation.Therefore, it is more than forging, extrusion, drawing and other processes to be more widely applied. At present, about 90% of the steel rolling are the mature. Production of finished rolled steel, in accordance with the section shape steel, mainly divided into three categories,steel plate, steel pipe and steel (including wire). Pressure device is the role of horizontal position adjustment roll (roll gap adjustment), to ensure that by rolling the given rolling reduction of the required size of the section. Habits are not with just down the pressure device such as the rapid pressure reduction devices installed on more than reversible hot-rolling machine, rolling mill unabated, slab rolling mill, plate mill reversible rolling units type, such as roughing mill. When the roll was not rolled piece, due to the roller bearing and the gravity, the pressure in the bearing between the screw, screw down the nut will have a gap between. In this way,when the rolled piece of roll bite, it will have an impact. In order to prevent this from happening, almost all are set on the rolling mill roll balance device, so close to bearing down on the screw thread end and to eliminate the gap between. BD l reversible breakdown machine is a two-roll mill manufactured by German company SMS bean steel rail production of new machines, it can achieve better and faster rail rapid rolling of steel beam. It uses electro-hydraulic double-reduction device .Electric roll down the realization of fast. Big trip, frequent adjustment and no w