挖掘机培训教材FOWA--Komatsu.pptVIP

Maintenance FOWA CHECK AND CHANGE OF OIL Content 1 Content 2 1. Ingredients of lubricating oil 2. Types and functions of additives 6. Failure example due to use of oils other than Komatsu recommended 9. Oil check/refill components and positions of filters to be replaced Check and change of engine oil 12. History of engine oil standard 13. Use Komatsu genuine oil DH series as engine oil Use Komatsu genuine oil when replacing and refilling engine oil 15. Use Komatsu genuine engine oil filter Komatsu genuine oil filter features improved filtration performance and extended life. Be sure to use Komatsu genuine parts and replace the filter when changing the engine oil. 17. Use of Komatsu genuine parts extend the oil change interval to every 500 hours. 18. Check the oil level before starting Add oil so that the oil level is always being kept between H and L marks of the oil level gauge. When the oil level is too low, the lubricating system becomes in short supply of oil and pistons and bearings may seizure in a short period of time. When the oil level is too high, the oil may cause overheating due to heat generation or power loss. Oil consumption depends on work loads and working conditions, regardless of oil quality. 19. Be sure to observe the oil change interval specified in the Operation and Maintenance Manual For oil change, observe the oil change interval specified in the Operation and Maintenance Manual. Engine oil deteriorates with time by heat, oxidization, generated sludge and carbons and the loss of additive effects even if high quality oil is used. Periodic oil change prevents machine troubles and extends the machine life. 20. Use adequate engine oil Use adequate multi-grade oil as engine oil in accordance with the ambient temperature of the job site. Multi-grade oil has resistance to temperature change and keeps appropriate viscosity. Furthermore, it has good lubricating property and prevents wear of equipment. When changing the type of engine oil, replace