馈线自动化算法可靠性量化评价方法及其应用.pdfVIP

馈线自动化算法可靠性的量化评价方法及其应用  凌万水  等  馈线自动化算法可靠性的量化评价方法及其应用 1 1 2 3 2 凌万水 ，刘东 ，陈新 ，柳劲松 ，何维国 (1.电力传输与功率变换控制教育部重点实验室，上海交通大学电气工程系，上海 200240） (2.上海市电力公司，上海 200233) （3.华东电力试验研究院，上海 200437） 摘要：馈线自动化算法逻辑具有离散型软件的特点，同时受系统与现场终端之间的通信 故障、开关设备的拒动、馈线运行方式改变等多种干扰因素的影响，可靠性问题一直是 制约其大规模应用的关键因素之一，针对馈线自动化算法的特点，文中提出一种馈线故 障定位、隔离和恢复（FLISR）算法可靠性评价的无失效测试方法，并以某实际投运现场 的智能分布式馈线自动化系统为例进行了应用，验证了所提可靠性评价方法的有效性。 关键字：馈线自动化，故障定位、隔离和供电恢复，可靠性，测试 The Quantitative Method of Reliability Evaluation for Feeder Automation Algorithm and Its Application 1 2 3 2 Ling Wanshui ,Liu Dong1,Chen Xin ,Liu JinSong ,He Weiguo 1.Key Laboratory of Control of Power Transmission and Conversion, Ministry of Education, Shanghai Jiao Tong University, Shanghai 200240, China) 2.Shanghai Municipal Electric Power Company, Shanghai 200233 , China) 3.East China Power Test Research Institute, Shanghai 200437,China) ABSTRACT:Feeder automation algorithm logic has the typical characteristics of discrete-type software. At the same time, interferenced by communication failures between system and site terminal unit, switch equipment refusing action, feeders changes its operation mode,and so on many kinds of interference factors. Reliability question has been one of the key restraining factors of large scale application. Aiming at the characteristics of feeder automation algorithm, this paper presents a no failure evaluation test method for feeder fault location, isolation and rest