喷墨印刷中纸张特性对印品阶调层次影响的研究.pdfVIP

纸张纸板及印刷适性 2010 中国印刷与包装学术会议会刊 338 Paper Printability Proceedings of CACPP 200 喷墨印刷中纸张特性对印品阶调层次影响研究 李春艳，褚夫强      （山东轻工业学院制浆造纸科学与技术省部共建教育部重点实验室，济南 250353 ） 摘要 本文探讨了喷墨印刷中纸张特性对印品阶调层次的影响，并对不同纸张特性的影响效果进行评价。实 验采用 Epson stylus Pro 7800 和 Epson Stylus c88+两种喷墨打印机对 HP 、Epson 等品牌的五种喷墨打印纸进 行研究。研究发现承印材料的性质与印品的阶调变化明显相关。孔隙率及粗糙度高的纸张，其印品图像的亮 调区域由于网点细小而无法在纸张上完整再现，网点密度为0，图像的亮调层次丢失，如 EPSON C88+ 在 2# 、 3#纸样上输出的 1%-C 和 2%-C 所示，其密度为 0 ；纸张越粗糙，其吸墨量越高于表面光滑的纸张，由此导致 图像的暗调部分合并过早，暗调层次丢失，如4#纸样印样所示。同时，纸张特性也是影响相对反差 K 值的主 要因素之一。纸张的光泽度、粗糙度、孔隙率等均对印品的相对反差有一定的影响。 关键词 阶调再现； 纸张特性； 承印材料； 中图分类号 TS761 ； TS853 基金项目 山东省中青年科学家科研奖励基金（No.2008BS04027 ） Study on the Influence of Papers’ Properties on the Printed Matter Tone in Inkjet Printing LI Chunyan, CHU Fuqiang （Key Lab of Paper Science and Technology of Ministry of Education,Shandong Institute of Light Industry, Jinan 250353, China) Abstract This paper discussed the influence of papers’ properties on the printed matter tone in inkjet printing, and evaluated the effect of different substrates’ characteristics. Epson stylus Pro 7800 and Epson Stylus c88+ were used to investigate the influence of five different substrates on pressworks. Results showed that the properties of substrates were relative to the change of printed matter tone. As a result of the small dot ,the high light area of image couldn’t be completely reproduced on the substrates with high porosity and smoothness.Its density was 0, and the highlights gradation of image was lost. This could be testified by 1%-Cyan and 2%-Cyan of sample 2# a