【毕业设计、论文】基于QT的嵌入式CAN网络监控GUI系统.pdfVIP

第29 卷 第16 期 计算机工程与设计 2008 年8 月 Vol . 2 9 N o . 16 Computer Engineering and Design Aug. 2008 QT CAN GUI 基于 的嵌入式 网络监控 系统 1 2 谭 平 ， 刘建新 (1. 西华大学数学与计算机学院，四川成都610039 ；2. 西华大学机械工程与自动化学院，四川成都610039) 摘 要：嵌入式现场总线监控系统需要解决 CAN 控制器的驱动和图形界面的设计问题。提出了一种基于 S3C24 10 和 MCP2510 的CAN 网络监控系统，在介绍Linux 设备驱动程序结构和模板的基础上，设计了嵌入式Linux 环境下MCP2510 的驱 动程序，并以QT/E 作为工具，给出了GUI 设计思想，提供了该系统的运行实例。 关键词：图形用户界面; CAN 总线; 网络监控; 嵌入式系统; 设备驱动程序 中图法分类号：TP368.1 文献标识码：A 文章编号：1000-7024 (2008) 16-4 147-03 GUI system for embedded CAN network monitoring based on QT 1 2 TAN Ping , LIU Jian-xin (1. School of Mathematics and Computer, Xihua University, Chengdu 610039, China; 2. School of Mechanical and Automation, Xihua University, Chengdu 610039, China) ( ) Abstract ：In order to monitor controller area network CAN , two problems such as device driver for CAN controller chip and graphics user interface under embedded OS should be solved. Firstly, a kind of monitoring system scheme based on ARM chip of S3C24 10 and CAN controller chip MCP2510 is provided, and then, structure and template for writing device driver under embedded Linux are intro- duced, and the device driver for MCP2510 is coded. And then, QT/E is selected to use as the GUI developing tools, and the flow chart for writing GUI programs is given too. Finally, a