毕业论文：基于AT90CAN128单片机的高炉烧结配料控制部分的研究.docVIP

基于AT90CAN128单片机的高炉烧结配料控制部分的研究 摘 要 烧结生产作为高炉炼铁顺利进行的前提,在冶金生产中起着相当重要的作用。配料是烧结的重要工艺环节之一,为了达到降低烧结矿成本,提高烧结矿产量和质量的目的,提高配料系统的管理和控制水平成为首要问题。本文详细地阐述了烧结配料计算机控制系统的组成。由上位机和下位机构成集散控制系统。现在 ,这一配料过程的计算机控制系统已在现场运行，较好地改变了配料系统的控制质量 ,收到了满意的使用效果。电子皮带秤是一种智能化的数字式动态称重显示仪，由秤量框架、称重传感器、测速传感器和显示仪表等四大部件组成。其基本原理是物料重量通过称量框架传递给称重传感器，变化为毫伏级电信号，再与测速传感器的皮带速度脉冲信号一起由显示智能仪表处理后进行累加显示。 关键词：高炉烧结 Based on sintering blast furnace AT90CAN128 ingredients MCU control part of the study Abstract Sintering blast furnace production as a prerequisite for the smooth conduct of the metallurgical production plays an important role. Batching process is an important aspect of sintering of the sinter in order to achieve lower costs and improve the quality of sintering of mineral and the purpose of proportioning system to improve the management and control issues become a priority. In this paper, the sintering detail the ingredients of the composition of the computer control system. By the upper and lower body into a distributed control system. Now, the ingredients of computer process control system has been running at the scene, changed the ingredients to better control quality, has received satisfactory results. Electronic belt scale is a kind of intelligent digital display instrument WIM, by weighing the framework, weighing sensor, Speed sensor and display instruments, such as the four major components. The basic principle is that the weight of materials delivered to the framework adopted by weighing weighing sensor, millivolt-level signal change, and then with the gun belt speed sensor with pulse signal processing by the display after the smart meter display cumulative. Key words: blast furnace sintering ingredients；reduce the cost of sintering ore；and minerals to improve sinter quality；distributed control system；the weight of ingredients 目 录摘 要 I Abstract II 第一章 引言 1 1.1 研究背景 1 1.2 研究题目 2 1.3 研究重点 3 1.4 研究系统的配料自动控制 4 第二章 整体方案设计 6 2.1 高炉烧结配料系统的组成 6 2.2 高炉烧结配料系统的工作方式 6 2.3 高炉烧结配料系统各部分功能 7 2.3.1 称重皮带秤及控制仪表功能 7 2.3.2 计算