毕业设计（论文）-南京某办公楼空调工程设计.docVIP

南京某办公楼空调工程 中文摘要 本设计为南京地区某办公楼空调工程设计，根据房间大小、功能、使用情况等具体情况合理布置空调设备，例如面积较大的大厅和营业厅等需要新风量，有效的进行除湿、降温并能满足设计风量要求，创造一个舒适的环境。而对于大多数小的办公室，由于其面积不大，所以本设计用了风机盘管加新风系统，主要是考虑了风机盘管体积小、风机盘管效率高风机盘管噪音低等优点。根据南京地域的特点，我选用了离心式冷水水机组， 关键词中央空调系统空调方案离心式式冷水机组 The design for an office building air conditioning engineering design of Nanjing, the office building underground layer, to have ten layer, office building in each room set up for Party activities room, recreation room, hall, conference room, a lot of small office, mainly for small office. The first layer height 5.7m, the rest of the layer height 3.9m, with a total height of 46.8m, total cold load of the building is 836681W, air-conditioned area of 9112.7m2, cold index for 91.8W/m2. According to the room size, the function, the use of specific situation of reasonable arrangement of air conditioning equipment, such as larger area of the hall and business hall, etc need fresh air volume, this design uses the diffuser air supply way, mainly for bulk flow is sent, reasonable bulk flow arrangement can effectively for dehumidifying, cooling and can meet the design requirement of air volume, to create a comfortable environment. And for most of the small office, due to its small area, so this design used fan coil plus fresh air system diffuser air the form, mainly consider the use of flexible, easy operation, fan coil has the advantages of small volume, high efficiency of fan coil unit, fan coil low noise. The air conditioning water system designed for the comprehensive office building is intended to adopt a vertical direction of the different programs, and the horizontal direction of the same form of the program. According to the characteristics of the Nanjing region, I chose the centrifugal water chiller, for the building summer cooling, to remove the excess heat. Keywords central air-conditioning system cold and hot air load air conditioning centrifugal chiller  目 录 前言 1 第一章原始资料 2 §1.1办公楼概况 2 §1.2南京地区气象资料 2 §1.3办公楼土建资料 3 第二章冷负荷计算 7 §2.1 负