2000KN冷室压铸机合模装置设计.docVIP

毕业设计说明书 2014届 2000KN冷室压铸机合模装置设计 学生姓名 某某某 学 号 0XXXXXXXXX 系 别 工程与技术系 专业班级 机自1000 指导教师 某某某 完成日期 2014-00-00 2000KN冷室压铸机合模装置设计 摘要 本次设计是对的设计。主要包括:、、这次毕业设计对设计工作的基本技能的训练，提高了分析和解决工程技术问题的能力，并为进行一般机械的设计创造了一定条件The design of model 2000KN cold chamber die casting machine ABSTRACT This design is the design of 2000KN cold chamber die casting machine clamping device. Here mainly includes: the structure design of three large formwork, mould locking machine hinge, adjustable die parts, check to determine the mode locking and the ejector oil cylinder size. The graduation design on the design of the basic skills training, enhancing the analysis and to solve engineering problems, and create a certain condition for general mechanical design. The structure is mainly composed of a cylinder power through the locking machine hinge will need to transfer the power to the movable template, dynamic template driven screw nut, which drives the clamping device movement, improve labor productivity and automation level of production. But also show its superiority, there are broad prospects for the development. The research of this thesis: (1) into 2000KN cold chamber die casting machine general structure design of equipment. (2) analysis of model 2000KN cold chamber die casting machine device performance. (3) design of locking machine hinge. (4) structure design of adjustable die components. (5) the design of components for the design calculation and check. (6) assembly drawing and parts assembly diagram and parts diagram design. Cylinder Keywords：cold chamber die casting machine, molding machine, lock 目录 摘要 I ABSTRACT II 1 绪论 1 2 冷室压铸机合模总体方案分析 7 3 合模部分结构尺寸设计 24 4 系统的调试和功能实现 34 结 论 38 参考文献 39 致 谢 40  1 绪论 1.1 压铸机压铸机就是在压力作用下把熔融金属液压射到模具中冷却成型，开模后得到固体金属铸件的一系列工业铸造机械，最初用于压铸铅字。随着科学技术和工业生产的进步，尤其是随着汽车、摩托车以及家用电器等工业的发展，又从节能、节省原材料诸方面出发，压铸技术已获得极其迅速的发展。压铸的起源众说不一，但据文献报导，最初用于压铸铅字。早在1822年，威廉姆?乔奇（Willam Church）博士曾制造一台日产1.2～2万铅字的铸造机，已显示出这种工艺方法的生产