双回线并列运行方式对系统及保护定值的要求_朱景富.pdfVIP

35 10 Vol.35 No.10 2007 5 16 RELAY May.16, 2007 ; ; Condition of system and protection setting coordination by adopting double power lines parallel operation ZHU Jing-fu (Henan Jiaozuo Power Supply Company, Jiaozuo 454150,China) Abstract: For 110 kV power networknot higher than 110 kV , it would not make the reseved protection of transformers at the center substation tripping switch of transformer right after it had tripped switch of busbars because of double power lines parallel operation. The whole busbar’s voltage at the center substation would decline to zero in either case of the withdrawal of busbar protection or of line protection(or line protection switch).Therefore, it needs a more effective and reliable operation to prevent the expanding of area of lost power, but not simply rely on Guide of calculating settings of relay protection for large generator and transformer to set the action time of reseved protection of transformers. This operation emphases that in a double power lines parallel operation system , the yare relay of the far end should trip right after the reseved protection of transformers tripping switch of busbars ,and following with the reseved protection tripping transformers. Key words: double power lines; reseved protection of transformers ; guide of caculating settings TM77 A 1003-4897(2007)10-0064-02