施耐德PLC讲座Concept+2_6+enhanced.pptVIP

Concept Version 2.6Content Overview IEC Interrupt Sections Enhanced Security General Features Concept 2.6 with Service Release 1 (SR1) integrates new features, general enhancements and bug fixes. Concept 2.6 SR1 is qualified for the following operating systems: Windows 98 Windows NT 4.0 Windows 2000 Windows XP Professional Applications created with Concept 2.5 SR2 are directly compatible with Concept 2.6 SR1. No program conversion is necessary. Applications created with older versions of Concept (V1.x or V2.x) can be maintained under Concept 2.6 SR1 after being converted using the included Concept converter tool. However, the conversion of Concept 2.6 applications to an earlier version of Concept is not supported. Applications created with Modsoft 2.2 or greater can be migrated using the Modsoft to Concept converter. The following new features are only supported in combination with 140CPU43412A and 140CPU53414A Quantum controller type: IEC Interrupt sections 21CFR11 related features Password for Quantum controllers Enable Write Restriction List Disable all writes from NOE/NOM Disable all writes from CPU Modbus Ports PLC Auto-Logout The new executive for the 140CPU43412A and 140CPU53414A Quantum controller is fully backward compatible to existing Concept 2.5 SR2 applications Concept 2.6IEC Interrupt Sections Concept 2.6 Features Interrupt IEC Sections I/O Event Interrupts Timer Event Interrupts Limitations The SFC language is not available as a language for Interrupt sections No hybrid project possible No HSBY Support No 16-bit loadable support Concept 2.6 Features Project Browser The new groups are not able to move I/O Event sections are sorted according to priority (slot and pin) Timer Event sections are not sorted Interrupt sections are not influenced by changing the execution order Why a Time-phase ? New Online Viewer for Event Sections that provides status information for maintaining Event Sections Concept 2.6Enhanced Security Options that