PALM-3000Software Requirements Review.ppt

PALM-3000Software Requirements Review Thang Trinh PALM-3000 Requirements Review, Caltech Campus November 12, 2007 Software Requirements Status Completed first draft of the Software Requirements Document (SwRD) Phase-2 software requirements not complete Plan Version 1.0 release by mid-December 2007 SwRD will serve as basis for the software architecture and implementation Contributions from A. Bouchez, J. Roberts, and software team members (J. Angione, S. Guiwits, T. Trinh, T. Truong) Software Context Diagram Software Functional Decomposition Data Flow Diagram High-Order Wavefront Processor(HWFP) Receive pixel data from the HOWFS camera. Compute X and Y centroid values for each subaperture using background subtracted, flat fielded pixel values. Subtract a reference value from each centroid. Compute residual wavefront error from the centroid values. Compute new positions of woofer mirror (DM349), tweeter mirror (DM3326), TTM, and UTT using a PI servo control loop. Compute offloading from tweeter mirror to woofer mirror. HOWFS frame rates, all servo loop parameters, reconstructors, and all HWFP configuration tables will be user selectable. Capable of independently turning on/off the TTM, woofer DM, tweeter DM, and UTT servo loops. Provide HWFP telemetry data to be recorded by the Telemetry Subsystem at the recording rate specified by the user. Low-Order Wavefront Processor(LWFP) Receive pixel data from the LOWFS camera. Compute X and Y centroid values for each subaperture using background subtracted, flat fielded pixel values. Subtract a reference value from each centroid. Compute residual wavefront error from the centroid values. Compute new positions of TTM using a PI servo control loop in LGS (and dual NGS) mode. LOWFS frame rates, servo loop parameters, reconstructors, and all LWFP configuration tables will be user selectable. Capable of turning on/off the TTM servo loop. Provide LWFP telemetry data to be recorded by the Telemetry Subsystem at th