夏普搅拌器操作手册最新版-中英文.pdf

OPERATION MAINTENANCE MANUAL FOR SHARPE MIXERS LIQUID AGITATION EQUIPMENT READ BEFORE UNPACKING MIXER YOUR MIXER HAS BEEN TESTED AND SHAFT STRAIGHTNESS VERIFIED PRIOR TO SHIPMENT. CAREFUL HANDLING OF SHAFT PRIOR TO AND DURING INSTALLATION WILL ENSURE PROPER OPERATION. THE FOLLOWING CRITERIA MUST BE ADHERED TO IN ORDER TO PREVENT DAMAGE TO EQUIPMENT OR SERIOUS INJURY TO OPERATING PERSONNEL: WARNING •HIGH VOLTAGE AND ROTATING PARTS CAN CAUSE SERIOUS OR FATAL INJURY. ONLY EXPERIENCED PERSONNEL MUST OPERATE OR SERVICE THIS EQUIPMENT. •NEVER ENTER TANK WITHOUT LOCKING-OUT POWER TO MIXER. •LOCKOUT POWER PRIOR TO REMOVING ANY GUARDS OR SERVICING ANY PART OF THIS EQUIPMENT, INCLUDING INITIAL INSTALLATION AND/OR INSPECTION. •THIS MANUAL MUST FIRST BE FULLY READ AND UNDERSTOOD PRIOR TO INSTALLATION BY ALL PERSONNEL INSTALLING AND/OR OPERATING THIS, OR NEAR THIS EQUIPMENT. •NEVER USE THIS EQUIPMENT FOR ANY USE OTHER THAN DESCRIBED IN THE ORIGINAL PROPOSAL AND APPLICATION BOX ON THE DATA SHEET. •MODIFICATIONS UNAUTHORIZED BY SHARPE MIXERS TO THIS EQUIPMENT MAY DAMAGE EQUIPMENT OR CAUSE SERIOUS INJURY TO PERSONNEL. CAUTION •ALWAYS READ THE SERVICE MANUAL THOROUGHLY BEFORE INSTALLATION AND START-UP. •OPERATION OF MIXER IN AIR IS NOT RECOMMENDED. •ALWAYS FOLLOW MOUNTING RECOMMENDATIONS DESCRIBED IN ORIGINAL PROPOSAL. MIXER PLATFORM MUST BE STABLE. •EXTENDED OPERATION OF MIXER WHEN LIQUID LEVEL IS AT OR NEAR BOTTOM IMPELLER IS NOT RECOMMENDED. •ALWAYS ROTATE THE SHAFT BY HAND TO VERIFY STRAIGHTNESS PRIOR TO OPERATION IN LIQUID. •ALWAYS CHECK ASSEMBLY DRAWING AND DATA SHEET FOR SPECIAL OPERATING SPEED REQUIREMENTS IF USING A V