Module 4 Version 2 -updated.pptVIP

1 Overview 概览 User Friendly Menu System.友好的用户界面 Supports Multiple Languages.支持多种语言 Single Point Access to Entire VESDAnet System.单点进入整个VESDAnet 系统 Alarm and Fault Simulation报警及故障模拟 Shows Wiring Order显示接线顺序 Locates Communications Failures.确定通讯故 障发生的位置 Password Security.多级密码准入设定 Hand Held or Remote Mounting.手持或远程安装 Automatic Logoff when Inactive.不工作时自动退出 Backlit LCD Screen.背景照明式LCD显示屏 Logon Screen 登录 Setup Screen 设置 LCD Screen LCD 显示屏 Wiring Order接线顺序 Setup By Type通过设备类型进行设置 Setup By Zone通过报警区进行设置 Zone 报警区 VESDA LaserPLUS Detector 01335 Zone 0 Status 状态 Status contd... Event Log 事件记录 Zone Control 区域控制 Smoke Thresholds烟雾阈值 Smoke Thresholds contd... AutoLearn 自学习 Zone Number 区域号 Zone Name/Location区域名称/位置 Air Flow 气流状态 Air Flow Contd….气流状态 Filter 过滤器 Reference Detector参考探测器 Rebuild Zone List重建区域列表 Power Supply Number电源编号 Relays Connected被连接的继电器 Relay Setup 继电器设置 Diagnostics 系统诊断 Factory Defaults出厂缺省设置 Communications 通讯 Miscellaneous 其它 VESDA LaserSCANNER LaserSCANNER Scan Status扫描状态 This Screen shows the levels of smoke coming into each port.此处显示了每一根探测管的烟雾浓度 It also shows the current status of the detector.也显示了探测器当前的状态 Manual Scan手动扫描 Scanning 扫描正在进行 Exit 退出 Zone Control区域控制 Scanner Smoke Thresholds扫描器烟雾阈值 Delays Thresholds – 继电器烟雾阈值- Delay, this sets the Scan delay 0-10 Secs 延迟-设定延迟时间0-10秒 Sector Time, this sets the purge time for each port. 扇区时间-设定每一个扇区的扫描时间 Threshold, indicates the Scan threshold currently in use. 烟雾阈值-显示了当前所设定的烟雾阈值 Day Threshold, shows the daytime Scan threshold 日间阈值-显示了日间的扫描烟雾阈值 Night Threshold, shows the night time Scan threshold. 夜间阈值-显示了夜间的扫描烟雾阈值 NOTE: The Scan thresholds are set by the ADAPTIVE SCAN THRESHOLD Scanner Smoke Thresholds扫描器烟雾阈值 Sector Factor 1, 2, 3, 4 – 扇区因数 1，2，3，4- Sector Factor allows the user to adjust the sensitivity of each individual pipe thus allowing pipes to be more or less sensitive than those adjacent to it. This is achieved by using SECTOR FACTOR.