学习情景.IP安全访问列表配置与调试.ppt

Slide 1 of 1 Purpose: This slide describe the User EXEC mode. Emphasize: Present the operational aspects of User EXEC mode. Tell your students that this command level allows a person to access only a limited amount of basic monitoring commands. Emphasize that they need to look carefully at the command prompter to make sure that they are in an appropriate mode for the command that they want to enter into the network device. If you can get your class to learn this lesson, this will eliminate (or at least reduce) the number of times that you have to point out that the student’s lab step is failing because he/she is here in user mode rather than in enabled mode. Transition next to an introduction of Privileged (or enabled) mode. Slide 1 of 1 Purpose: This slide describe the Priviledged EXEC mode. Emphasize: As you present the introductory material on Privileged (also called “enabled”) mode, emphasize that this mode is the entry mode for all the other configuration modes. Tell your students that they will need this mode for ICND labs and most of the network administration that they do back on the job. Use the analogy of “the price of admission”: You must type enable and then pay with the correct enable password; otherwise, you do not get into the network device; you have to stay outside in user mode where you can only see a few basic things about the network device. Note: This slide ends the introductory material that is common to the network devices covered in ICND. Transition with the next slide to material specific to the initial start up of the Catalyst switch. 学习情景1.2 交换机管理 可以通过多种途径来配置 配置直接在设备的内存中生效 控制端口 Aux 端口 端口 PC or Unix服务器 Web 或网络管 理服务器 虚拟终端 多种途径的配置 Telnet TFTP 提供命令行界面 在不同的网络设备上运行时有差别 在命令模式下可以键入或粘贴命令 键入命令后回车，设备即解析和执行所键入的命令 两个主要命令模式是用户模式和特权模式 不同的命令模式有不同的提示符 IOS RG IOS用户界面的基本特性 用户模式 对交换机和路由器的有限操作 命令提示符为 主机名> 主要有两个命令模式提供命令键入. 模式一: Cisco IOS的主要命令模式 特权(或enabled)模式 对交换机和路由器更深入的操作 有配置和监视权力 是进入其它配置模式的前提 命令提示符为 主机名# 模式二 (也是最常用的模式): Cisco IOS的主要命令模式(续)