基于RapidIO协议的光纤通信系统设计与实现刘光祖.pdfVIP

第53 卷 第7 期 电讯技术 Vol.53　No.7 2013 年7 月 Telecommunication En ineerin Jul.2013 doi:10.3969/j .issn.1001-893x.2013.07.003 基于RapidIO 协议的光纤通信系统设计与实现 刘光祖 , 张　强, 仲雅莉 (南京理工大学 电子工 与光电技术学院, 南京 210014) 摘　要:为了满足嵌入式系统对高速数据传输的需求, 提出了一种基于RapidIO 协议的光纤通信系 统解决方案。利用光模块实现光、电信号的转换, 高速收发器实现物理层协议, 现场可编 门阵列芯 片实现逻辑层协议。测试结果表明, 所提方案成本低, 性能可靠, 数据吞吐率达到1.25 Gb/s。该方 案已成功应用于电子不停车收费系统中。 关键词:光纤通信;高速收发器;嵌入式系统;电子不停车收费 中图分类号:TN929.11　　文献标志码:A 　　文章编号:1001-893X (2013)07-0840-05 Design and Implementation of a Fiber-optic Communication System Based on RapidIO Protocol LIU Guan -zu,ZHANG Qian , ZHONG Ya-li (School of Electronic En ineerin and Optoelectronic Technolo y, Nanjin University of Science and Technolo y,Nanjin 210014,China) Abstract:In order to meet the demands of hi h-speed data transmission in embedded systems, a fiber optic com- munication system solution is proposed based on RapidIO protocol.The conversion of the optical to electrical si nals is executed by optical modules.The hi h-speed transceiver is employed to realize the physical layer pro- tocol and Field-Pro rammable Gate Array (FPGA)is adopted to acheive the lo ic layer protocol.The test results demonstrate that the pro ram is cost-effective and reliable.With the data throu hput of 1.25 Gb/s, the pro- posed scheme has been successfully applied in an electronic toll collection(ETC)system. Key words:fiber-optic communication;hi h-speed transceiver;embedded system;ETC 层协议相比, 其协议更为简单, 占用的系统资源更 1　引　言 少;与PCIE 相比, RapidIO 支持多种类型的拓