上向水平分层充填采矿法的优化研究.pdfVIP

Series No. 358 金 属 矿 山 总第358 期 ApriI 2006 METAL MINE 2006年第4 期 ·采矿工程 · 上向水平分层充填采矿法的优化研究* 1 2 1 李兴尚 吴法春 许家林 （1. 中国矿业大学；2 . 新桥矿业公司） 摘 要 针对新桥硫铁矿上向水平分层江砂胶结充填采矿法存在的问题，优化了采矿方法，科学地设计了胶 结充填体强度，在试验基础上，优化了充填材料及配合比。得出了满足安全生产条件的充填体强度：矿柱充填体单 轴抗压强度为2 . 1 Mpa ，矿房浇面充填体 = 1. 0 Mpa ， = 3. 0 Mpa ；达到了最佳充填材料配比：矿柱和矿房浇 !14 !28 面的充填体灰沙比分别为1f 7 和1f 5 。研究成果已在新桥硫铁矿推广应用，效果良好. 关键词 上向水平分层充填采矿法 充填材料 配合比 优化 Research on Optimization of Flat-backcut-and-Fill Stoping Method 1 2 1 Li Xingshang Wu Fachun Xu JiaIin （1. China Uniuersity of Mining Technology ；2. Xingiao Mining Co. ） Abstract In view of the probIems existing in the fIat-backcut-and-fiII stoping method used in Xingiao Mining Co. ， the mining method was optimized and the strength of cemented fiIIing bodies designed in a scientific way. On the basis of experiment ，the fiIIing materiaIs and the proportioning ratio were optimized. As a resuIt ，the strength of the fiII mass that can meet the reguirements of safety production was achieved ，that is ，the uniaxiaI compressive strength of piIIar fiII mass is 2 . 1Mpa and the strength of the room pouring pIatform ， = 1. 0 Mpa and = 3. 0 Mpa. The best proportioning of fiII- !14 !28 ing materiaIs was aIso reached ，with the cement sand ratio for piIIar and room fiIIing being 1：7 and 1：5 respectiveIy. The research achievement