电力系统动分岔控制.pdfVIP

第 39 卷 第 23 期 电力系统保护与控制 Vol.39 No.23 2011 年 12 月 1 日 Power System Protection and Control Dec.1, 2011 基于 Washout-filter 方法的电力系统动分岔控制 马幼捷，李小双，周雪松，李 季，问虎龙，贾丽英 （天津市复杂系统控制理论及应用重点实验室（天津理工大学）， 天津 300384 ） 摘要：电力系统中的分岔现象严重影响系统的稳定性和电压质量，为提高系统的稳定性和电能质量，对分岔现象的控制迫在 眉睫。介绍了动分岔的相关理论和目前非线性系统中常用的两种分岔控制方法。重点论述了用 Washout-filter 法对电力系 统的动分岔进行控制。研究表明：对系统进行动分岔控制后，施加控制前系统存在的两个动分岔点消失，并且很大程度上增 加了系统的稳定运行域。理论分析和仿真结果相符，证实了该控制方法的有效性。 关键词：电力系统；动分岔；Hopf分岔；高通滤波器控制；稳定域；负荷裕度 Control of dynamic bifurcation in power system based on Washout-filter MA You-jie ，LI Xiao-shuang ，ZHOU Xue-song ，LI Ji ，WEN Hu-long ，JIA Li-ying （Tianjin Key Laboratory for Control Theory Applications in Complicated Systems，Tianjin University of Technology ，Tianjin 300384，China ） Abstract ：Dynamic bifurcation in power system affects system stability and voltage quality seriously and it is imminent to control dynamic bifurcation so as to improve system stability and power quality. The theory of dynamic bifurcation and two common control methods which are used in bifurcation control are introduced. A bifurcation controller is designed using the method of Washout-filter so as to control the dynamic bifurcation in power system．Research result shows that two dynamic bifurcation points are eliminated effectively through the controller. The stable region of the system increases largely. Theoretical analysis and computer simulation show that Washout-filter method can work very well in dynamic bifurcation control. This work is supported by National Natural Science Foundation of China (No. and Tianjin Natural Science Fund Project (No. 09JCYBJC07100). Key words ：power system ；dynamic bifurcation ；Hopf bifurcation ；Washout-filter control ；stable region；load margin 中图分类号： TM71 文献标识码：A