IPMSM的弱磁控制策略(IEEE论文).pdf

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 33, NO. 1,JANUARYFEBRUARY 1997 43 Speed Control of Interior Permanent Magnet Synchronous Motor Drive for the Flux Weakening Operation Jang-Mok Kim, Student Member, IEEE, and Seung-Ki Sul, Member, IEEE Abstruct- A novel flux-weakening scheme for the interior decoupling controller were proposed for the flux weakening permanent magnet synchronous motor (IPMSM) is proposed. operation. This voltage compensator operates well in tuned This is implemented based on the output of the synchronous PI operating conditions. But if there is an extra voltage margin current regulator-reference voltage to the PWM inverter. The onset of flux weakening and the flux level are adjusted inherently due to the weakening of the permanent magnet flux linkage by the outer voltage regulation loop to prevent saturation of according to temperature rise or dc link voltage variations, the the current regulator. Attractive features of this flux weakening drive system may diverge because of an improper operation scheme include no dependency on the machine parameters, the of the voltage compensator. guarantee of current regulation at any operating condition, and In previous studies the performance of IPMSM drive system smooth and fast transition into and out of the flux weakening mode. Experimental results at various operating conditions in- in an extended speed region was strongly dependent on the cluding the case of detuned parameters are presented to verify motor parameters because the model of IPMSM, especially the feasibility