高层隔震结构设计与分析方法恒锐孙柏锋.pdfVIP

9 区高层隔震结构设计与分析方法 1 2 3 4 孙柏锋 ，王广宇，潘文 ，陈华 （1 云南恒锐建设技术咨询有限公司，昆明，650011；2 昆明恒基建设工程施工图审查中心， 昆明，650011；3 昆明理工大学工程抗震研究所，昆明，650504；4 云南世纪阳光建筑设计 有限公司，昆明，650011） ［摘要］与传统抗震设计相比，隔震设计对一些设计人员来说存在一定的困难。有必要对高层隔震设计中 需注意的问题进行分析讨论，对此本文以9 度区某小区的高层隔震建筑为例加以说明。计算分析结果表明， 隔震支座参数设计合理，各项指标均满足规范要求，上部结构地震响应明显降低，提高了上部结构的抗震 性能，本文最后对高层隔震设计的构造措施作了简单的说明。 ［关键词］高层隔震；隔震层；剪力墙结构;支座受拉 Design and Analysis methods of high-rise isolated structure for 9-degree seismic precautionary intensity zone 1 2 3 4 Sun Baifeng ，Wang Guangyu ，Pan Wen ，Chen Hua (1 Yunnan Hiever Construction Consult Co.,Ltd. 2 Kunming Hengj i Checking Center of Construction Project Shop Drawing. 3 Institute of Earthquake Engineering, Kunming University of Science and Technology. 4 Yunnan Century Sunshine Construct Design Co.,Ltd.) Abstract: Compared to the conventional seismic resistant design, isolation design is difficult in some degree for some designers. Therefore, it is necessary to analyze and discussion Problems on design for seismic isolated high-rise building. Taking the High-rise Isolated Building of 9 Intensity for Example, this paper introduces the application. The results of calculation and analysis show that the design parameter of isolation bearing is reasonable and the indexes of isolation devices meet the requirements of Code for seismic design of buildings. The seismic behavior of upper structure is improved by isolation, and the seismic response of upper structure is significantly decreased. At last, brief explains are made for isolation design construction measure. Keywords: Seismic isolated high-rise building；Seismic isolation layer ；Shear-wall structure；Bearings in tension 0 引言 隔震建筑的抗震能力