SAPI配置手册.docVIP

IDOC配置手册 1.自建IDOC类型 2 2.扩展标准IDOC 8 3.创建接口端口和逻辑系统 13 4. 配置分布模型和伙伴参数 17 5.激活指针 21 6.设置筛选器 22 7.异常处理 27 1.自建IDOC类型 1.1首先创建用来记录增量发送时间戮的自建表ZIDOC_LOG，结构如下图： ZMKAL（用于自定义IDOC类型发布生产版本） 1.3WE30定义基本类型ZMKAL_IDOC，将刚才定义的段ZMKAL挂在此类型下 1.4 WE81定义消息类型MKAL_IDOC。 1.5WE82 把基本类型MKAL_IDOC分配给消息类型MKAL_IDOC。 1.6定义自定义IDOC类型所需的结构ZMKAL_LINE。 表结构,ZMKAL_TYP,对应行类型结构为ZMKAL_LINE 创建发送生产版本IDOC用的函数：ZMKAL_IDOC_SEND,源代码如下,参数、异常定义见函数开头说明FUNCTION?zmkal_idoc_send?.*----------------------------------------------------------------------**Local?interface:*??TABLES*??????ZMKAL?TYPE??ZMKAL_TYP*??EXCEPTIONS*??????NO_IDOC*??????NO_MODEL*----------------------------------------------------------------------*variables?of?general?interest??DATA:*control?record?for?the?IDoc??idoc_control?LIKE?edidc,*data?records?for?the?IDoc??t_idoc_data?LIKE?edidd?OCCURS?0?WITH?HEADER?LINE,*table?for?the?IDocs?created?by?MASTER_IDOC_CONTROL??t_comm_control?LIKE?edidc?OCCURS?0?WITH?HEADER?LINE,*partner?type?for?logical?system??c_partner_type_logical_system?LIKE?edidc-rcvprt,*help?variable?for?the?check?if?an?IDoc?has?to?be?created??h_create_idoc.*?variables?specific?for?this?example??DATA:*???????field?strings?with?IDoc?segment?structure????????e1xmkal?TYPE?zmkal_line,*???????data?to?be?put?to?the?control?record????????c_message_type?LIKE?edidc-mestyp?VALUE?ZMKAL_IDOC,????????c_base_idoc_type?LIKE?edidc-idoctp?VALUE?ZMKAL_IDOC,*???????segment?types?to?be?put?to?the?data?record?table????????c_header_segtyp?LIKE?edidd-segnam?VALUE?ZMKAL.*?check?if?an?IDoc?has?to?be?created,?read?the?distribution?model??CALL?FUNCTION?ALE_MODEL_DETERMINE_IF_TO_SEND???????EXPORTING????????????message_type???????????=?c_message_type*?????????SENDING_SYSTEM?????????=??*?????????RECEIVING_SYSTEM???????=??*?????????VALIDDATE??????????????=?SY-DATUM???????IMPORTING????????????idoc_must_be_sent??????=?h_create_idoc.*????exceptions*?????????own_system_not_defined?=?1*?????????others?????????????????=?2.??IF?h_create_i