碳化锆陶瓷复合材料的制备、显微组织与性能.pdfVIP

第30 卷 第5 期 无 机 材 料 学 报 Vol. 30 No. 5 2015 年5 月 Journal of Inorganic Materials May, 2015 文章编号: 1000-324X(2015)05-0449-10 DOI: 10.15541/ji 碳化锆陶瓷复合材料的制备、显微组织与性能 王 东, 王玉金 (哈尔滨工业大学 特种陶瓷研究所, 哈尔滨 150001) 摘 要: 碳化锆(ZrC)陶瓷复合材料具有熔点高、密度低、耐烧蚀的优点, 在超硬、航天防热、新能源等领域应用前 景广阔。本文概述了ZrC 金属陶瓷和复相陶瓷、纤维增强ZrC 复合材料的制备方法。着重介绍了粉末烧结、先驱 体转化、反应浸渗等工艺的应用, 并讨论了不同制备工艺下复合材料显微组织的特点。在总结两类材料力学性能和 烧蚀性能的基础上, 分析了各自的影响因素, 并指出ZrC 金属陶瓷和复相陶瓷韧性低, 纤维增强ZrC 复合材料烧蚀 层易剥落的问题。最后总结展望了ZrC 陶瓷复合材料相关研究的发展趋势。 关 键 词: ZrC 复合材料; 制备; 组织结构; 性能; 综述 中图分类号: TB332 文献标识码: A Processing, Microstructure and Properties of ZrC Ceramic Composites WANG Dong, WANG Yu-Jin (Institute for Advanced Ceramics, Harbin Institute of Technology, Harbin 150001, China) Abstract: ZrC ceramic composites have been proposed for a variety of applications in super-hard, thermal protection and new energy fields due to their excellent properties, such as high melting point, low density and good ablation re- sistance. The preparation techniques for ZrC cements, composite ceramics and fiber reinforced ZrC composites are re- viewed, including powder sintering, precursor infiltration and pyrolysis and reactive melt infiltration. The effects of processing on microstructure of ZrC composite are discussed. Mechanical properties and ablation properties of ZrC ceramic composites are summarized. The problems, low toughness and spalling of ablation layer, for ZrC cements, composite ceramics and fiber reinf