层次网络体系结构-交换.pptVIP

* Type 0 表示keepalive 消息 Type 1 Inverse ARP 消息 0x2 -- Active 0x0 -- Inactive 0x4 -- Delete Status of the PVC. The DCE device reports the status, and the DTE device receives the status. When you disable the Local Management Interface (LMI) mechanism on the interface (by using the no keepalive command), the PVC status is STATIC. Otherwise, the PVC status is exchanged using the LMI protocol: ?STATIC—LMI is disabled on the interface. ?ACTIVE— The PVC is operational and can transmit packets. ?INACTIVE—The PVC is configured, but down. ?DELETED—The PVC is not present (DTE device only), whi