anchor handling operation check list.xls

Sheet3 Sheet2 Sheet1 主机报警检查和测试 舵系统检查和测试 侧推检查和测试 Gyro compass error known Stability within prescribed limits 手动工具已备妥 工作艇及吊放装置，浮筒套索，撇缆等已检查并随时可用 Oxy-Acetylene cutting gear tested ready 切割工具检查和测试 甲板上所有物品已妥善固定和绑扎，甲板清爽或留有足够的工作空间 Bridge windows clean -- washers/wipers checked 计划和作业 各参与方出席的起抛锚准备会议已举行 Anchor handling plan: 注意事项已告知：如水下障碍物，工作参数，需装载的锚、锚链，浮筒布置，布锚速度，锚链尺寸和长度，最大拉力等 Rig up of anchor system confirmed: Barge particulars: Number and type of anchors, bearing, distances, peculiarities of barge-crane outreach limitations, below water hull, projections, winch characteristics 设施资料已了解：锚的数量和类型，方位和距离，克令吊的最大跨距，绞车特点，水下构造等 Crew properly dressed and PPE Present and future weather conditions appraised 风险评估已进行，风险已识别，防范措施已制定 When received, clarified, understood, and/or modified 船舶起抛锚作业检查表 ship equipments and riggings 船舶设备和属具 Yes No Main engines running at correct speed 主机运行检查和测试 Main engines alarm annunciators tested Pitch controls/clutch controls tested 主机螺距角/离合器控制检查和测试 Control transfer forward-aft OK 主机前后操纵转换检查和测试 Steering gear tested Thrusters tested Pos. con system tested 定位系统检查和测试 电罗经误差检查 Radars functioning 雷达功能检查和测试 External communications tested 通讯设备检查和测试 船舶稳性较核 Trim correct/adjusted 船舶吃水差调整 Towing/anchor handling winch function tested 拖缆机/起抛锚机功能检查和测试 Winch brakes adjusted 刹车检查和调整 Gauging/alarms tested--winch system 拖缆机/起抛锚机指示和报警检查和测试 Guide pins, stoppers function tested (remote and local) 导向柱和止链/缆器功能检查和测试 Pennant reels function tested 短索及滚筒/支架检查和测试 Deck lighting fully functional 甲板照明 Search lights functional 探照灯 Echo sounder operational 测深仪 Navigation lights displayed 航行灯 驾驶台玻璃窗清洁，冲水装置/刮雨器检查 Work winch/work wipe properly attached spooled and ready 合适的工作缆已准备妥当 Hand tools in position aft Tuggers spooled, safety hooks, chain tails checked and secured 小绞车钢丝、插销等已备妥 Boat hooks, hand grapple heaving lines, buoy lassos safety slings, chain snotters ready Shackles, hinge links, chain links checked 卸扣、连接卸扣（环）检查 Pelican hooks and pennants checked 释放钩和短索检查 Grapple, J-hook available 备用锚钩