A grey and fuzzy algorithms integrated approach to the optimization of turning Hadfield steel with Al2O3_TiC mixed ceramic tool英文资料.pdfVIP

j o u r n a l o f m a t e r i a l s p r o c e s s i n g t e c h n o l o g y 2 0 7 ( 2 0 0 8 ) 89–97 j o u rn al h omepage: www.elsevi er.c om /locate/j matprotec A grey and fuzzy algorithms integrated approach to the optimization of turning Hadfield steel with Al O /TiC mixed ceramic tool 2 3 Jenn-Tsong Horng, Ko-Ta Chiang ∗ Department of Mechanical Engineering, HsiuPing Institute of Technology, No. 11, Gungye Road, Dali City, Taichung 41280, Taiwan, ROC a r t i c l e i n f o a b s t r a c t Article history: This paper focuses on the development of a fast and effective algorithm to determine Received 19 September 2006 the optimum manufacturing conditions for turning Hadfield steel with Al O /TiC mixed 2 3 Received in revised form ceramic tool by coupling the grey relational analysis with the fuzzy logic. The flank wear 9 October 2007 and surface roughness were adopted to evaluate the machiniablity performances. Vari- Accepted 14 December 2007 ous cutting parameters, such as cutting speed, feed rate, depth of cut and nose radius of tool were explored by experiment. An orthogonal array was employed for the experimen- tal design. This proposed algorithm obtains a grey–fuzzy reasoning grade to evaluate the Keywords: multiple performance characteristics through the grey relational coefficient of each perfor- Grey relational analysis mance characteristic.