A Hybrid Approach to Energy Consumption Modelling based on Cutting Power A Milling Case英文资料.pdfVIP

Accepted Manuscript A Hybrid Approach to Energy Consumption Modelling based on Cutting Power: A Milling Case N. Liu, Y.F. Zhang, W.F. Lu PII: S0959-6526(15)00596-X DOI: 10.1016/j.jclepro.2015.05.049 Reference: JCLP 5558 To appear in: Journal of Cleaner Production Received Date: 11 December 2014 Revised Date: 16 April 2015 Accepted Date: 13 May 2015 Please cite this article as: Liu N, Zhang YF, Lu WF, A Hybrid Approach to Energy Consumption Modelling based on Cutting Power: A Milling Case, Journal of Cleaner Production (2015), doi: 10.1016/ j.jclepro.2015.05.049 This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to our customers we are providing this early version of the manuscript. The manuscript will undergo copyediting, typesetting, and review of the resulting proof before it is published in its final form. Please note that during the production process errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain ACCEPTED MANUSCRIPT 1 A Hybrid Approach to Energy Consumption Modelling based on Cutting Power: 2 A Milling Case 3 N. Liu, Y. F. Zhang*, and W. F. Lu 4 N. Liu is with the Department of Mechanical Engineering, National University of Singapore. (E-mail: liuning@u.nus.edu). 5 Y. F. Zhang is with the Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 6 117576 (corresponding author, Tel: +65 fax: +65 E-mail: mpezyf@nus.edu.sg). 7 W.F. Lu is with the Department of Mechanical Engineering, National University of Singapore. (E-mail: mpelwf@ nus.edu.sg). T