6方钢管溷凝土穿心高强螺栓端板节点抗剪承载力研究.pdfVIP

第 40 卷 第 4 期 建 　筑 　结 　构 2010 年 4 月 方钢管混凝土柱穿心高强螺栓端板节点 抗剪承载力研究 1 1 2 1 何益斌 , 　黄 　频 , 　冷巧娟 , 　肖阿林 ( 1 湖南大学土木工程学院 ,长沙 4 10082 ; 2 同济大学土木工程学院 ,上海 200092) [摘要] 　根据试验和理论研究成果 ,对方钢管混凝土柱穿心高强螺栓端板节点核心区的受力机理进行了分析 ,建 立了节点核心区的受力模型和屈服机制 ,推导了节点核心区的抗剪承载力计算公式 。公式不仅考虑了螺栓和柱轴 力对节点核心区实际受力状态的影响 ,而且考虑了钢管对混凝土的约束作用 。用推导的公式计算了 3 个方钢管混 凝土柱穿心高强螺栓端板节点试验模型节点区的抗剪承载力 ,计算结果与试验结果吻合较好 。 [ 关键词] 　方钢管混凝土柱 ; 穿心高强螺栓端板节点 ; 节点核心区; 剪切刚度 ; 抗剪承载力 Study on shearcarrying capacity of through high strength boltsend plate connection for concrete f illed square steel tube column 1 1 2 1 He Yibin , Huang Pin , Leng Qiaoj uan , Xiao Alin ( 1 College of Civil Engineering , Hunan University ,Changsha 410082 , China ; 2 College of Civil Engineering , Tongji University ,Shanghai 200092 , China) Abstract :According to theoretical analysis and test results , the mechanism of force transfer in panel zone was analyzed , and a mechanical model was established in order to derive theoretical equations for calculating the yielding shear strength and the ultimate shear strength of the panel zone . The formulas not only take into account the effect of high strength bolts and axial compressive force of column , but also the restriction provided by steel tube for concrete . The formulas were used to calculate the shearcarrying capacity of the panel zone of three specimens , and the results computed by presented formulas agreed well with experiments data . Keywords :concrete filled square steel tu