TaMo激光焊接的温度场模拟.pdfVIP

Ta/Mo 激光焊接的温度场模拟 1 1,2 宋芳芳 ，金亮 [1.工业和信息化部电子第五研究所 电子元器件可靠性物理及其应用技术重点实验室 广州 510610 songff@ 020 2.华南理工大学 机械与汽车工程学院，广州510640] [ 摘 要 ] 采用ANSYS Workbench 软件，模拟分析了在激光功率400w，光斑直径0.3mm，焊接时 间1 min 的参数下难熔异种金属钽和钼的激光焊区的温度场。文章介绍了模型建模、网格划分、边界条件 约束、材料的热物理性能参数随温度变化的加载方法，并讨论了高斯和平均分布两种不同热源模型的加载 方式的模拟结果。结果表明，两种不同的热源模型加载方式下获得的焊接过程的温度场分布结果接近，但 高斯热源作用下的试样温度偏高、其焊点截面形状更加接近真实焊点形状。 [ 关键词 ] 有限元分析；激光焊接；温度场；ANSYS Workbench Temperature field simulation of Ta/Mo laser welding 1 1, 2 Song Fangfang , Jin Liang [1.China Electronic Produce Reliability and Environmental Testing Research Institute, Science and Technology on Reliability Physics and Application of Electronic Component Laboratory,Guangzhou,510610,China, songff@, 020 2.South China University of Technology, School of Mechanical and Automotive Engineering, Guangzhou, 510640, China] [Abstract] Temperature field simulation of Ta/Mo laser welding with the parameter of 400w laser power, 0.3mm spot diameter 1s welding time was gained using finite element analysis method based ANYSY Workbench. The methods of modeling, meshing, boundary conditions, loading of thermo physical performance parameters were introduced and two different heat source model loading methods were discussed. The results showed that the two different heat source model can accurately predict the temperature distribution of laser welding process, but the highest temperature of welding region using Gaussian heat source model wa