基于Johnson_Cook模型的TC16钛合金动态本构关系.pdfVIP

18 3 2008 3 Vol.18 No.3 The Chinese Journal of Nonferrous Metals Mar. 2008 1004-0609(2008)03-0505-06 Johnson-Cook TC16 ( 410083) InstronHopkinson298~773 K0.001~ 15 550/sTC16Johnson-Cook Johnson-Cook 5/s 10 673 KTC16TC16 TC16Hopkinson TG 113.2 A Dynamic constitutive relationship of TC16 titanium alloy based on Johnson-Cook model YANG Yang, ZENG Yi, WANG Bing-feng (School of Materials Science and Engineering, Central South University, Changsha 410083, China) Abstract: The true stresstrue strain curves of Ti-3%Al-5%Mo-4.5%V alloy with a wide range of strain rates were investigated under uniaxial quasi-static tension and uniaxial dynamic compression respectively with Instron 8032 test machine and the split Hopkinson bar. A new method incorporating the stress—strain curve of Ti-3%Al-5%Mo-4.5%V alloy was proposed for determining the parameters based on Johnson-Cook model easily and avoiding the estimation of adiabatic temperature rising. The Johnson-Cook dynamic constitutive relationship for Ti-3%Al-5%Mo-4.5%V alloy was obtained. The results show that the true stress increases with increasing strain rate, while decreases with increasing temperature. Under the condition of high strain rate of 105/s and temperature above 673 K, the true stress is even less than that under quasi-static condition. Good agreement is obtained between the model prediction and the experimental stress—strain curves for Ti-3%Al-5%Mo-4.5%V alloy under both quasi-static and dynamic loadings. Ke