LTE典型信令过程.ppt

LTE 典型信令过程 Software Architecture 3类NAS信令流程 1. 会话管理相关 2. 位置管理相关 3. 鉴权管理相关 UE initiated Detach Procedure Network Triggered Service Request TAU procedure Inter MME-TAU-message flow Handover Handover Air Interface X2 Handover S1 Handover 开始 Before the UE can do anything, a Radio Resource Control connection must be established. The RRC is a logical connection between the UE and E-UTRAN. There are two different RRC states: RRC IDLE RRC CONNECTED RRC IDLE This state indicates that there is no signaling radio bearer is established i.e. no RRC connection is established. The UE is considered RRC_