旋转轴对称LED均匀照明系统设计方法.pdf

# 21 8 2010 8 Journal of Optoelectronics # Laser Vol. 21 No. 8 A g . 2010 * 旋转轴对称LED 均匀照明系统设计方法* 1,2* * 1 1 1 王 洪 , 王海宏, 张小凡, 张奇辉 ( 1. , , 510640; 2. School of Materials Science En- gineering, Georgia Instit te of Techology, Atlanta 30332, USA) : , LED , LED, , , 85%, 90 % :; ; : TH74 :A : 1005-0086(2010) 08-1163-04 Design method for axisymmetric uniform illumination system with LED 1, 2* * 1 1 1 WANG Hong , WANG Ha-i hong , ZHANG Xiao-fan , ZHANG Q-i h i ( 1. G angdong Engineering Research Center of Semicond ctor Lighting, School of Science, So th China University of Technology , G angzho 510640, China; 2. School of Materials Science Engineering, Georgia Instit te of Tech- nology , Atlanta 30332, USA) Abstract: An optical system design method for LED lighting based on edge-ray theory is presented.The two LED niform ill mination systems based on LED lens and reflector respectively are developed to target a specific distance from the s rface of the formation of niform ill minated circ lar spot with de- sired size.Two kinds of optical systems are sim lated by ray tracing software based on Monte-Carlo method, the res lts show that the l mino s niformity is better than 85% in the ill minated spot and the system efficiency is higher than 90%. Key words: semicond ctor lighting; edge-ray theory; niform ill mination system , 1