钢筋溷凝土转换厚板的抗震设计.pdfVIP

40 8 2010 8 扶长生, 鞠 进, 姜 平 ( , 200011) [ ] , , , , , , , , , , 13 [ ] ; ; ; Seismic design of reinforced concrete flat slabtype transfer structure Fu Changsheng, Ju Jin, Jiang Ping ( Shanghai Chinafu Structural Design nc. , Shanghai 200011, China) Abstract: The flat slab has the merits to increase the story clearance, to be easy to arrange steel bars and to do formwork. However, taking into account the effects on the dynamic behavior of structure due to the heavy weight of the flat slab supporting the walls or columns and the brittle behavior of punching failure, the limitations were made in the provisions of GB 500 11 2001 and JGJ 3 2002 about the use of flat slabtype transfer structure in the high seismic intensity zone. The recently presented test results show that the adequately reinforced slabcolumn connection, which is essentially subjected to punching shear , may have good ductility in strong earthquake. Now , the stress pattern and flow path in the flat slabtype structure can be clearly shown by the developed computer programs. After introducing the ductile slabcolumn connection construction, the seismic performance objective is defined for the transfer flat slab, and the design method is presented to resist the design earthquake by using FEM. The results of nonlinear analysis of engineering projects show that transfer flat slab designed by the method presented here does not yield even if the maximum considered earthquake is acted. Compared to beamtype transfer structure, the section design is more reasonable and steel contents are much less. Keywords: concrete tra