51单片机__数码管显示_串行模数转换ADC0832.docVIP

#includereg51.h #includeintrins.h #define uchar unsigned char #define uint unsigned int //#define disdata P0 //显示数据段码输出口 #define channel_0 0x02 //单通道0输入选择 #define channel_1 0x03 //单通道1输入选择 sbit ADC_DI = P3^4; //数据输入输出复用 sbit ADC_DO = P3^4; //DI和DO端都接在P1.0 sbit ADC_CLK= P3^5; //时钟端 sbit ADC_CS = P3^6; //片选端 sbit ACC0=ACC^0; //通道与输入方式控制字 sbit ACC1=ACC^1; //通道与输入方式控制字 sbit DISX=P0^7; //LED小数点 uchar code disply[11]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0xff}; // 0 1 2 3 4 5