实时操作系统在微机保护设备中的应用.docVIP

The Application of RTOS in Microcomputer Protection Device 实时操作系统在微机保护设备中的应用 Abstract—This paper introduces an open source code embedded real-time operation system μC/OS-II and then analyzes its characters and structure. On the basis of introduction of thedevelopment of microcomputer protection device, the paper proposes the project which is μC/OS-II applied in microcomputer protection device, and also analyzes the development process which is real-time operation system μC/OSII applied in microcomputer protection device based on the core of TMS320F2812 processor.At the last, the paper point out the superiority when using μC/OS-II in microcomputer protection device. 摘要——本文介绍了一个嵌入实时运算系统μC/OS-II的开放代码并分析了它的结构和特性。基于微机保护设备发展的介绍，本论文提出了对μC/OS-II在微机保护设备的应用，同时分析了实时运算系统μC/OS-II 在以TMS320F2812处理器为源代码的发展过程。最后，本论文指出了使用μC/OS-II实时运算系统微机保护设备的优势。 Keywords–microcomputer protection device; real-time operation system; multitask 关键词——微机保护设备；实时操作系统；多任务 I. INTRODUCTION Ⅰ介绍 Microcomputer protection device is the important component in the power system. It requires highreal-time, high reliability, and also can effectively take on the responsibility of power network.. Microcomputer protection device mostly used 16-bit single-chip in the hardware design at present which can satisfy the regular protection performance but that is often influenced by factors such as operation speed and memory capacity, etc. It is difficult to realize the more complicated algorithm and higher speed of sampling. The programming of software adopts the linear program design mechanism which make the procedures influence each other and also influence the systematic real-time character and dependability[1]. In view of this, this paper has proposed a kind of scheme of applying embedded real-time operating system μC/OS-II to the microcomputer protection device, adopts high-performance TMS320F2812 processor, thus that can great to improve whole real-time character, dependability, maintainability of system. This have refle