LED光源模型研究.pdfVIP

2006 年 3 月 照明工程学报 Mar . 　2006 第 17 卷 　第 1 期 ZHAOMIN G GON GCHEN G XUEBAO Vol17 　No1 L ED 光源模型研究 陈琼 　刘红 　李金国　沈彦南 (浙江工业大学机电工程学院 , 杭州 　310014) 摘 　要 : LED , 由于其自身的耐震动 、抗冲击 、长寿命和无污染等独特的优点 , 随着发光效率的提高 , 其应用面不 断扩大 。本文提出的光源迭加模型 , 更准确反映LED 光强随发光角度渐变的特性 , 经过详细论证 , 完全可行 , 且 操作简单 , 易于实现 , 只要追迹的光线足够多 , 误差就非常之小 , 效果比较理想 , 一般设计人员很容易掌握并应 用 。 关键词 : 发光强度 ; 光源叠加 ; 光线追迹 ; 误差 Research on L ED Lighting Source Model Chen Qiong 　Liu Hong 　Li Jinguo 　Shen Yannan ( College of Mechanical and Electrical Engineering , Zhej iang University of Technology , Huangzhou 　310014) Abstract 　 With improvement of lighting efficiency , L ED is consistently extending its application in practice as its peculiar advantage , which including resistance to vibrancy and impact , durable ability , and no pollution . The lighting source model put forward in this article , simulates attenuation characteristic of L ED , that is lumnous intensity of L ED attenuating according to its emitting angle , in a more exact way . It is proved feasible in elaborate demonstration , quite simple to establish the source model , and easy to realize expected result with very low error estimates if the number of traced ray is enough . It is an easy way for designer to master and put it into practice . Key words : lighting intensity ; source model in an added way ; ray tracing ; error 简单 , 安装灵活方便 ,