tcp烟囱故障处理方法.docVIP

This article describes the TCP Chimney Offload, Receive Side Scaling (RSS), and... This article describes the TCP Chimney Offload, Receive Side Scaling (RSS), and Network Direct Memory Access (NetDMA) features that are available for the TCP/IP protocol in Windows Server 2008. Back to the top MORE INFORMATION TCP Chimney Offload overviewTCP Chimney Offload is a networking technology that... TCP Chimney Offload overview TCP Chimney Offload is a networking technology that helps transfer the workload from the CPU to a network adapter during network data transfer. In Windows Server 2008, TCP Chimney Offload enables the Windows networking subsystem to offload the processing of a TCP/IP connection to a network adapter that includes special support for TCP/IP offload processing.TCP Chimney Offload is available in all versions of Windows Server 2008 and Windows Vista. Both TCP/IPv4 connections and TCP/IPv6 connections can be offloaded if the network adapter supports this feature. Back to the top How to enable and disable TCP Chimney Offload in Windows Server 2008 TCP Chimney Offload can be enabled or disabled in the following two locations: The operating system The advanced properties page of the network adapter TCP Chimney Offload will work only if it is enabled in both locations. By default, TCP Chimney Offload is disabled in both these locations. However, OEM installations may enable TCP Chimney Offload in the operating system, in the network adapter, or in both the operating system and the network adapter. How to configure TCP Chimney Offload in the operating system To enable TCP Chimney Offload, follow these steps: Use administrative credentials to open a command prompt. At the command prompt, type the following command, and then press ENTER: netsh int tcp set global chimney=enabled To disable TCP Chimney Offload, follow these steps: Use administrative credentials to open a command prompt. At the command prompt, type the following command, and then press