改版之后中英文资料.docVIP

中英文资料 Information in Chinese and English 学 生 姓 名 学 号 系、年级专业 指 导 教 师 林立 职 称 教授 2014年 月 日ONE Introduction to PWM Pulse width modulation, the abbreviation pulse width modulation is the use of microprocessor digital output to control for analog circuit is a kind of very effective technology, widely used in from measurement, communication to power control and transform in many areas. PWM is pulse width modulation, namely 390v variable pulse waveform. Is this conclusion as the theoretical basis for semiconductor switching device, conduction and shutoff control, to make the output terminal get a series of amplitude and width equal to the unequal pulse, with these pulses instead of a sine wave or other need waveforms. According to certain rules of each pulse width modulation, can change on the size of the output voltage inverter circuits, can also change output frequency. With the development of electronic technology, the emergence of a variety of PWM technology, including: phase voltage control PWM, pulse width PWM method, randomized PWM, SPWM method, line voltage control PWM etc, and in intelligent charger nimh batteries used in pulse width of PWM method, it is each pulse width are equal pulse column as a PWM waves, by changing the pulse column cycle can be FM, change pulse width or 390v can surge, using appropriate control method can make voltage and frequency coordinate changes. Can adjust the cycle, PWM PWM 390v and achieve the purpose of control charge current. Although simulation control may look intuitive and simple, but it is not always very economic or feasible. One is, analog circuit is easy, and over time to adjust drift. To solve the problem of precision analog circuits can be very large and bulky (such as old-fashioned family stereo equipment) and expensive. Analog circuits and