铁路道岔尖轨轨高的测量基准研究.pdfVIP

网络出版时间：2013-03-25 10:10 网络出版地址：/kcms/detail/11.2987.U1010.002.html ·线路/ 路基 · 铁路道岔尖轨轨高的测量基准研究 袁宝军 , 邹小魁1 2 (1. 中铁宝桥集团有限公司, 陕西宝鸡摇 721006;2. 中铁山桥集团有限公司, 河北秦皇岛摇 066205) 摘摇 要:尖轨的轨高是影响轨道结构振动与变形、列车运行安全性、平稳性及轨道养护维修工作量的重要参数,而 尖轨轨高的测量基准则是检测尖轨轨高正确与否的重要基础;针对目前尖轨轨高测量的第一测量基准与第二测量 基准,假定车轮与钢轨均为刚体,以尖轨轨高之间的高差和以轨轮接触关系为依据计算得出机车车辆在垂直方向 的位移作为2种评价指标,对尖轨轨高的测量基准进行了讨论。 结果表明,在测量尖轨轨高时,采用第一测量准则 更为合理。 关键词:铁路道岔;尖轨轨高; 测量基准; 评价指标 中图分类号:U213郾6摇 摇 文献标识码:A摇 摇 文章编号:1004 2954(2013)04 0005 03 Study on Measuring Basis for Height of Railway Turnout Switch Rail YUAN Bao鄄jun ,ZOU Xiao鄄kui1 2 (1.China Railway Baoji Bridge Group Co. ,Ltd. ,Baoji721006,China;2. China Railway Shanhaiguan Bridge Group Co. ,Ltd,Qinhuangdao066205,China) Abstract:The height of the switch rail is an important parameter which will produce influences on the track structurevibration anddeformation,ontrain蒺soperation safety and stability,andontheworkloadof track maintenance. Thus,the measuring basisisthe key to measurethe correct height of the switch rail. Aiming atthe 1st measuringbasisandthe2ndmeasuringbasiswhich areallusedforheight measurement of the switch rail at present,and supposing that the wheel and the steel rail are all rigid,this paper adopts two kinds of evaluation indexes,including the height difference between the switch rails,and the vertical displacement of the locomotive and vehicle which is obtained by calculation based on wheel鄄rail contacting relationship. And then each measuring basis for measuring the height of the switch rail is discussed respectively in this paper. The results indicate that it is more reasonable to use the 1st