超硬磨料砂轮修整与激光修整新进展_陈根余.pdfVIP

DO I :10.13394/j .cnki .j gszz.2002.02.002 ·8 · 《金刚石与磨料磨具工程》 超硬磨料砂轮修整与激光修整新进展 410082 　()　　　　　 ()　　 　　本文介绍了超硬磨料砂轮修整的现状和 点, 指出超硬磨料砂轮修整的关键和亟待解决的问题。 重点介绍一种很有前途的修整技术———激光修整, 分析了其国内外近年来的研究情况。作者用声光调Q YAG 激 光对树脂结合剂CBN 砂轮进行了修锐试验, 得出了声光调Q YAG 激光适宜修锐树脂结合剂砂轮的结论。对今后 的超硬磨料砂轮激光修整的发展方向作了展望:建立材料热去除模型和气体动力学模型, 完善激光修整机理的研 究;实现激光整形和修锐过程同时进行;深入研究激光精密修整技术;开发成形砂轮激光修整技术;开发自适应控 制修整系统, 实现激光在线修整;提高修整效率。 　超硬磨料砂轮　激光修整　声光调Q YAG 激光　现状　展望 ABSTRACT 　The current situation and characteristics of superabrasive whee s dressing are recommended in this paper. Keys of superabrasive whee s dressing and dressing prob ems to be so ved are presented .A promising dressing technique ——— Laser Dressing is emphasized.Study on Laser Dressing at home and abroad in recent years has been ana yzed.Dressing experi- ments are made on resin-bonded CBN whee s with opto-acoustic Q-switched YAG Laser.A conc usion is made that opto-acous- tic Q-switched YAG Laser is adaptive to dress resin-bonded CBN whee .Prospects of Laser Dressing on superabrasive whee s in the future are as fo ow s:estab ishment of thermohydrodynamics mode ;improvement on study of dressing mechanism;imp emen- tation of aser truing and dressing simu taneous y;deep study on Laser Precision Dressing;deve opment of Laser profi e dress- ing;deve opment of adptive contro ed dressing system;imp ementation of on-ine Laser Dressing and improvement of dressing efficiency . KEYWORDS 　superabrasive whee s, Laser Truing and Dressing, Opto-acoustic Q-switched YAG Laser, current situ- ation, prospect 0 　 , 。 (CBN ) , 。 , : , 1 。 、、、、 1　 、;CBN 、、。