基于一阶剪切变形理论和移动最小二乘近似的加肋板屈曲临界荷载求解.pdfVIP

第 29 卷第 7 期 Vol.29 No.7 工 程 力 学 2012 年 7 月 July 2012 ENGINEERING MECHANICS 42 文章编号：1000-4750(2012)07-0042-07 基于一阶剪切变形理论和移动最小二乘近似的 加肋板屈曲临界荷载求解 彭林欣，杨绿峰 (广西大学土木建筑工程学院，南宁 530004) 摘 要：针对加肋板屈曲临界荷载的求解，提出了一种基于一阶剪切变形理论和移动最小二乘近似的无网格方法。 该方法将加肋板的肋条和平板分开考虑，肋条用梁模型来模拟，按照一阶剪切变形理论和移动最小二乘近似给出 平板和肋条的无网格近似位移场，再利用板和肋条交界上的位移协调条件推导出将肋条的节点参数转换成板节点 参数的公式，最后通过转换公式，将板和肋条的势能叠加，由最小势能原理得到描述整个加肋板线性屈曲行为的 控制方程。该文方法相对有限元的优势在于加肋板肋条不必沿网格线布置，即使肋条位置改变也不需要网格重构。 文末通过几个算例比较了该文方法解和采用实体单元的 ANSYS 有限元解，两者较为接近，证明了该文方法的准 确性。 关键词：加肋板；屈曲临界荷载；一阶剪切变形；移动最小二乘近似；无网格法 中图分类号：TU398 文献标志码：A doi: 10.6052/j.issn.1000-4750.2010.10.0725 CRITICAL BUCKLING LOAD CALCULATION OF RIBBED PLATES BY THE FIRST-ORDER SHEAR DEFORMATION THEORY AND THE MOVING-LEAST SQUARE APPROXIMATION PENG Lin-xin , YANG Lu-feng (College of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China) Abstract: In order to obtain the critical buckling load of ribbed plates, a meshfree method based on the first-order shear deformation theory (FSDT) and the moving-least square (MLS) approximation is introduced. The plate and the ribs of a ribbed plate are considered separately and the ribs are simulated with a beam model. The approximated displacement fields of the plate and the ribs are determined according to the FSDT and MLS approximation. Employing the displacement compatible conditions along the interface between the plate and ribs, the formula that transforms the nodal parameters of the ribs to those of the plate is derived. Superposing the potential energy of the p