ZK60镁合金ECAP变形组织及力学性能.pdfVIP

Hot 2013，V01．42，No．1 WorkingTechnology ZK60镁合金ECAP变形组织及力学性能 吴宝红1。贾俊豪2，周丽丹3，刘山梁子4，王红霞2，曹晓卿2 西职业技术学院，山西太原030006；4．兰州理工大学材料科学与工程学院，甘肃兰州730050) 摘 织、室温力学性能和高温抗蠕变性能的影响。结果表明，合金铸态组织主要由d-Mg基体、Mg函3相和MgZn相组成。等 通道挤压可显著破碎层片状MgZn相并使其趋于弥散分布，同时基体组织也得到细化。挤压2道次后，合金的室温抗拉 强度却下降至242MPa；合金的高温蠕变寿命由铸态1．4h延长到44．8h。稳态蠕变速率减小了约一个数量级。 关键词：ZK60镁合金；等通道挤压；显微组织；力学性能；蠕变 中图分类号：TG379；TG376．2文献标识码：A onMicrostructureandMechanical ofZK60 Study Properties Magnesium DeformedECAP Alloy by WU ZHOU NG Junha02， Lidan3，LIU Baohon91，JIA Shanlingzi4，、7l，AHongxia2，CAOXiaoqin92 ElectricPower ofMaterialsScienceand (1．Shanxi EquipmentFactory，Taiyuan030031，China；2．CoHege Engineering, of TaiyuanUniversityTechnology,Taiyuan030024，China；3．ShanxiPolytechnic CoBege，Taiyuan ofMaterialsScienceand of 730050，China) Engineering，LanzhouUniversityTechnology，Lanzhou Abstract：ZK60 wasextruded channel was magnesiumalloy byequal angularpressing(ECAP)at300C，which transmutationofdifferent effectsofECAPon atroom undergone microstructure，mechanical passes．The properties and resistanceofthe were resultsshowthatthe temperaturehigh-temperaturecreep alloy investigated．Experimental microstructureofas—cast are and ECAP alloymainlya-Mgmatrix，MgTZn3MgZnphases．Duringprocessing，theoriginal