CO2激光发生器.docVIP

CO2激光 (CO2 LASER OSCILLATOR) Panasonic激光要素技 特点 Features Design concept 基本Standard specification 丰富的 Interchangeable 应用高品质的激光模式、可以在一台设备上实现薄板高速切断，到厚板切断的 多种材料的加工。Creating pure mode applied to various materials from “sheet metal high-speed cutting” to “thick plate cutting” 高品 通DC电源、电极、气流的最佳化实现高品质的激光模式、可以实现高品 Beam quality Create stable mode by optimized DC power supply, electrodes and gas flow, Provides a high quality edge and accuracy is achieved. 高功率容限 最大115%以上 High Power Margin Maximum output is 115%or more of rated output. 降低耗 新开DC电源，可以达到90%以上的 Reduction of Electric Capacity Electrical efficiency is 90% or higher due to the new developments in the power supply unit Reduce running cost by lower electric consumption. 通5分） 在启 High-Speed stand-by (Approx 5 minutes). Suitable discharge gain distribution at start time and Adopting the structure that it’s not influenced easily by the temperature change. 应用高品质的激光模式、可以实现「薄板的高速切断」到「厚板切断」的、多种材料的加工。 额定输出与型号Rated outputType 1kw 1.5kw 1.8kw 2kw 2.5kw 3.3kw 4kw 6kw YB-L100A8 YB-L150A8 YB-L180A8 YB-L200A8 YB-L250A8 YB-L330A8 YB-L400A8 YB-L600A8 方式System　Principle DC放电　　　　高速軸流型DC Discharge Excitation Fast Axial Gas Flow 连续输出可変范围Power range 200～ 1000w 300～ 1500w 360～ 1800w 400～ 2000w 500～ 2500w 660～ 3300w 800～ 4000w 1200～ 6000w 波長Wave length 10.6μm 激光模式Beam mode TEM01 主要成分 TEM01 MAINLY 脉冲周波数：脉冲范围 10Hz～1kHz：duty 0～100% 脉冲周波数：脉冲范围Puls freq.:Pulse duty 10Hz～1kHz：duty 0～100%1kHz～2kHz：duty 20～100% 激光用气Laser gas composition 1He：N2：CO2 Gas mixture (He：balanced, N2:23.4%±1%, CO2:1.7%±0.2%) 激光用气消費量(lit./h) Laser gas consumption 30 60M 输入电源 3Φ200V(kVA)Input power supply capacity 15 20 20 23 34 40 52 64 输入电源 1Φ100V(kVA)Input power supply capacity 0.5 冷却水 水量(lit./min.)Cooling water volume水温 Water temperature 70以上More than7015～20 70以上More than7015～20 70以上More than7015～20 80以上More than8025～28 100以上More than10015～20 130以上More than13015～20 160以上More than16015～20 240以上More than24015～20 重量(概算)(