《《61_How to Configure iSCSI Advanced ACL on QNAP Turbo NAS》.docxVIP

How to Configure iSCSI Advanced ACL on QNAP Turbo NAS This document shows you how to configure iSCSI Advanced ACL (access control list) on QNAP Turbo NAS and verify the settings. All x86-based Turbo NAS models (TS-x39, TS-x59, TS-509, and TS-809) support this feature.? Introduction In a clustered network environment, multiple iSCSI initiators can be allowed to access the same iSCSI LUN (Logical Unit Number) by cluster aware file system or SCSI fencing mechanism. The cluster aware mechanism provides file locking to avoid file system corruption. If you do not use iSCSI service in a clustered environment and the iSCSI service is connected by more than two initiators, you will need to prevent multiple accesses to an iSCSI LUN at the same time. QNAP iSCSI Advanced ACL (Access Control List) offers you a safe way to set up your iSCSI environment. You can create LUN masking policy to configure the permission of the iSCSI initiators which attempt to access the LUN mapped to the iSCSI targets on the NAS. LUN Masking is used to define the LUN access rights for a connected iSCSI initiator. If an initiator is not assigned to any LUN Masking policy, the default policy will be applied (See figure 1). You can set up the following LUN access rights for each connected initiators: Read-only: The connected initiator can only read the data from the LUNs. Read/Write: The connected initiator has Read and Write permission to the LUNs. Deny Access: The LUN is invisible to the connected initiator. Assumptions: This how-to demonstrates how to configure advanced ACL on QNAP Turbo NAS. The test environment is set as Table 1. Host 1 and Host 2 connect to the same iSCSI target which has 3 LUNs. The file system format of the LUNs is NTFS. The default policy is deny access from all initiators. The LUN permission for the two initiators is listed in Table 2. Note:If some iSCSI initiators have connected to the iSCSI targets when you are modifying the ACL settings, all modifications will take effect on