《《Activation analysis of coolant water in ITER blanket and divertor》.pdfVIP

Fusion Engineering and Design 87 (2012) 1310–1314 Contents lists available at SciVerse ScienceDirect Fusion Engineering and Design j o u r n a l h o m ep a g e : w w w. elsev /locate/fusengdes Activation analysis of coolant water in ITER blanket and divertor Qi Yang a,b,∗ , Tongqiang Dang a,b , Dongchuan Ying a , Guozhong Wang a,b , Michael Loughlin c a Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031, China b School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui 230027, China c ITER Organization, Route de Vinon sur Verdon, 13115, St. Paul-lez-Durance, France a r t i c l e i n f o a b s t r a c t Article history: Coolant water in blankets and divertor cassettes will be activated by neutrons during ITER operation. 16N Available online 5 April 2012 and 17N are determined to be the most important activation products in the coolant water in terms of their impact on ITER design and performance. In this study, the geometry of cooling channels in blanket Keywords: module 4 was described precisely in the ITER neutronics model ‘Alite-4’ based on the latest CAD model ITER converted using MCAM developed by FDS Team. The 16N and 17N concentration distribution in the blanket, Cooling water activation divertor cassette and their primary heat transport systems were calculated by MCNP with data library Contact dose FENDL2.1. The activation of co