中期验货手册.pdfVIP

Page 1 of 5 In-line Inspection Guideline 1. This is applied for QA inspectors for in-line inspection of product being produced for The Childrens Place. QAThe Childrens Place 2. This outlines the procedure of doing in-line inspection at field which is to quantify the visual, functional and measurement defect levels on the production lots. This will assist in determining if the manufacturing process is achieving the desired level of product quality. QA 3. Vendor Guide 4. WIP Work In Process or semi-finished product in production floor WIP- 5. Merchandising team is responsible to prepare the order information in QA folder for inspection reference. The information is included but not limited to as follows: QA approved production sample pre-production review report graded size specification Prepared by: Date: Approved by: Date: Page 2 of 5 In-line Inspection Guideline order details sheet bill of materials QA Co-ordinator is responsible to confirm the inspection date and travel arrangement with factory. QA QA Inspector is responsible to conduct the in-line inspection at factory. Upon the completion of inspection, all findings should be reported and communicated with factory representative at closing meeting. QA 6. On-job training will be provided to QA Inspector at the first one month of employment. Performance will be evaluated by QA Manager. QA Inspector should be qualified with acceptance evaluation prior to conducting