三道湾水电站钢岔管和衬砌结构应力分析.pdf

三道湾水电站钢岔管和衬砌结构应力分析 陆誉婷1，沈振中1，马峰2 (1．河海大学水利水电学院，江苏南京210098； 2．甘肃省水利水电勘测设计研究院，甘肃兰州730000) 摘 m。根据该工程的实 要：三道湾水电站位于甘肃省讨赖河上，水电站压力管道为地下埋管，设计水头达372．72 际，建立了岔管及其围岩的三维有限元模型。采用钢岔管和嗣岩联合承载的设计原则，计算分析了在设计内水压力 作用下，不同钢岔管管壤厚度和衬砌结构对应的钢岔管及外包混凝土的应力状态，选择了合理的钢岔管管壁厚度； 最后复核各种工况下钢岔管的应力状态，证明钢岔管和衬砌推荐方案满足规范要求，成果可供设计和施工参考。 关键词：钢岔管；衬砌；应力；三道湾水电站 of Stress SteelBifurcationand StructureforSandaowan Station Analysis Lining Hydropower LuYutin91，ShenZhenzhon91，MaFen92 of Water and (1．College ConservancyHydmpowerEngineering，HohaiUniversity，Nanjing210098，Jiangsu，China； 2．GansuWater and and Institute，Lanzhou ConservancyHydropowerInvestigationDesign 730000，Gansu，China) Abstract：TheSandaowan in ofstation StationislocatedontheTaolaiRiverGansu the Hydropower Province，andpenstock isburied witha headof372．72m．Thethree-dimensionalfiniteelementmodelforstress was undergrounddesign analysis established．Thestressesofbifurcationand concreteunder andontheconditionsofvarious surrounding designpressure bifurcationthicknessesand structureswerecalculatedbasedonthecombined ofbifurcationand lining bearingprinciple rock．Thethicknessofbifurcationwasselected thecalculationandthestresseswerecheckedfor surrounding according different conditions．Theresultsshowthattherecommendedschemeofbifurcationand meetsthe operating lining of andcanbeasrefer