《MMSE Weight for Single-carrier Overlap FDE》.pdf

2011 17th Asia-Pacific Conference on Communications (APCC) 2nd – 5th October 2011 | Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia MMSE Weight for Single-carrier Overlap FDE Tatsunori OBARA† and Fumiyuki ADACHI‡ Dept. of Electrical and Communication Engineering, Graduate School of Engineering, Tohoku University 6-6-05, Aza-Aoba, Aramaki, Aoba-ku, Sendai, 980-8579, JAPAN E-mail: †obara@mobile.ecei.tohoku.ac.jp ‡adachi@ecei.tohoku.ac.jp Abstract—Overlap frequency-domain equalization (FDE) requires no cyclic prefix (CP) insertion. In this paper, a new II. OVERLAP FDE minimum mean square error (MMSE) weight is derived for the The residual IBI after MMSE-FDE is a circular convolution overlap FDE. In the previous paper, the MMSE weight for of the MMSE-FDE filter impulse response and the IBI in a overlap FDE is derived by approximating the IBI as a white received signal. Figure 1 shows the example of the impulse Gaussian variable. However, the IBI is an independent colored response of the MMSE-FDE filter for a fast Fourier transform noise. We derive a new MMSE weight by taking into account this (FFT) block size of Nc=256 and an L=16-path Rayleigh fading fact. We evaluate the bit error rate (BER) performance by