《UL1977-Component_Connectors_for_Use_in_Data》.pdfVIP

UL 1977 ISBN 1-55989-948-4 Component Connectors for Use in Data, Signal, Control and Power Applications OCTOBER 18, 2002 − UL 1977 tr1 Underwriters Laboratories Inc. (UL) 333 Pfingsten Road Northbrook, IL 60062-2096 UL Standard for Safety for Component Connectors for Use in Data, Signal, Control and Power Applications, UL 1977 First Edition, Dated December 22, 1995 Revisions: This Standard contains revisions through and including October 18, 2002. Text that has been changed in any manner is marked with a vertical line in the margin. Changes in requirements are marked with a vertical line in the margin and are followed by an effective date note indicating the date of publication or the date on which the changed requirement becomes effective. UL Standards for Safety are developed and maintained in the Standard Generalized Markup Language (SGML). SGML -- an international standard (ISO 8879-1986) -- is a descriptive markup language that describes a document’s structure and purpose, rather than its physical appearance on a page. Due to formatting differences resulting from the use of UL’s new electronic publishing system, please note that additional pages (on which no requirements have been changed) may be included in revision pages due to relocation of existing text and reformatting of the Standard. The revised requirements are substantially in accordance with UL’s Bulletin on this subject dated June 24, 2002. The bulletin is now obsolete and may be discarded. The revisions dated October 18, 2002 include a reprinted title page (page1) for this Standard. As indicated on the title page (page 1), this UL Standard for Safety is an American National Standard. Attention is directed to the no